Norcros Thick Bed Porcelain & Stone Grey Floor Tile Adhesive
Norcros Thick Bed Porcelain & Stone Grey Floor Tile Adhesive

Norcros Thick Bed Porcelain & Stone Grey Floor Tile Adhesive is a grey cement based thick bed floor adhesive designed for fixing fully vitrified porcelain, ceramic and natural stone* tiles to a variety of floor surfaces. Its shrinkage compensating deep bed formulation makes it ideal for the installation of large format tiles and slabs affording excellent area contact without the need to back butter. It is water and weather resistant and is suitable for both internal and external locations. It has a setting time of 3 hours permitting early trafficking of the tile installations. Containing unique Rock-Tite™ polymeric binders, the enhanced flexibility of the adhesive allows a greater range of fixing possibilities normally only achieved by the addition of separate admixtures. The adhesive has excellent thermal ageing properties and is particularly suitable for heated floors and timber floors when overlaid with WBP/Marine grade plywood.

Conforms to BS EN 12004 C2F

*When fixing light coloured stone use a white adhesive such as Norcros Thick Bed Stone & Porcelain White or Rapid Porcelain & Stone White to avoid staining.

£17.83 + VAT

Data Sheet

Safety

To order call 07711 017464

Norcros Thick Bed Porcelain Stone - White
Norcros Thick Bed Porcelain Stone – White

Norcros Thick Bed Porcelain & Stone White Floor Tile Adhesive is a white cement based thick bed floor adhesive designed for fixing fully vitrified porcelain, ceramic and natural stone* tiles to a variety of floor surfaces. Its shrinkage compensating deep bed formulation makes it ideal for the installation of large format tiles and slabs affording excellent area contact without the need to back butter. It is water and weather resistant and is suitable for both internal and external locations. It has a setting time of 3 hours permitting early trafficking of the tile installations. Containing unique Rock-Tite™ polymeric binders, the enhanced flexibility of the adhesive allows a greater range of fixing possibilities normally only achieved by the addition of separate admixtures. The adhesive has excellent thermal ageing properties and is particularly suitable for heated floors and timber floors when overlaid with WBP/Marine grade plywood.

Conforms to BS EN 12004 C2F

£17.83 + VAT

Data Sheet

Safety

To order call 07711 017464

Norcros Pro 50 Levelling Compound
Norcros Pro 50 Levelling Compound

Norcros Pro 50 Levelling Compound is a single part, fibre reinforced self smoothing floor underlayment. It is suitable for use from 3mm to 50mm in one application without the need for additional granite chippings. The product is suitable for levelling a variety of substrates including concrete, screed, flooring grade asphalt terrazzo and existing quarry and vinyl tiles. It is ideal for use with undertile heating mats where it may be used to cover the wired elements, providing a level substrate to tile to and also protecting the heating elements during the fixing process. The product is also suitable for use on timber floors which must be overlaid with a minimum l5-18mm thick WBP or Marine grade plywood screw fixed at maximum 300mm centres to both joists and existing boards. The plywood should be primed with neat Norcros Prime Bond which should be allowed to dry prior to application of the levelling compound.

It is essential to ensure that the floor is sufficiently rigid and deflection free to support the additional weight of tiling before commencing. The excellent levelling and flow properties of the product make it ideal for preparing sub floors prior to fixing ceramic or natural stone tiles or soft floor coverings such as carpet vinyl and timber. It has a setting time of 4 hours at 20°c permitting early foot traffic and fast track tile fixing.

£13.50 + VAT

Data Sheet

Safety

To order call 07711 017464

Norcross Prime Bond
Norcross Prime Bond

Norcros Prime Bond is a multipurpose water based synthetic SBR polymer. It is water and weather resistant and is suitable for internal and external use on a wide range of substrates as a primer, sealer, dust proofer, slurry bonding coat and admixture in screeds and renders.

Shake bottle before use.

1 litre – £6.95 + VAT
5 litre – £16.00 + VAT

Data Sheet

Safety

To order call 07711 017464

Norcross Pro-Board
Norcross Pro-Board

Norcros Pro Board 600 and 1000 are high performance 10mm thick construction/tile backer boards, manufactured from high density polystyrene. The rigid insulation core is coated with a specially formulated reinforced cementitious coating that provides a hard wearing robust waterproof surface perfect for the application of tiles/plaster and synthetic render. The foam core has excellent thermal insulation properties and also provides high compressive strength with very low weight. The cement coating enhances the fire resistant properties of the boards and creates a tile ready surface. The cement‐based coating also gives the board excellent impact resistance, ensuring that the boards stand up to the rigour of the site environment.

Norcros Pro Board is suitable for use on both internal and external walls and floors.. It ‘s thermal efficiency ensuring that heat is not lost to the substrate below. It’s rigidity and stability mean that a 10mm board is sufficient to replace the more conventional 15‐18mm thick plywood required as per BS 5385‐3:2007 to overlay timber floors prior to tiling. The board is waterproof and therefore suitable for use in showers, steam rooms, pools and spas. The 10mm board will support a maximum weight limit of 85kg/m2 when used on walls.

6mm – £6.95 + VAT
10mm – £7.95 + VAT
12mm – £8.95 + VAT
Washer Packs (100 per bag) £13.95 + VAT
Pro Board tape – 10M £25.50 + VAT

Data Sheet

To order call 07711 017464

Norcros - Wet Seal Tanking Kit Box
Norcros – Wet Seal Tanking Kit Box

Norcros Wet Seal is a white brush applied tanking membrane specifically designed for use beneath ceramic, porcelain and natural stone tiles and mosaics on both internal walls and floors in installations subject to intermittent and frequent wetting such as domestic and commercial showers, wet rooms and saunas.

Norcros Wet Seal is sold in kit form, consisting of 5kg of liquid membrane, 500ml of Norcros Prime Bond Primer and 10m of 100mm wide waterproof polyester tape. Additional 5m lengths of 100mm wide tape and 1m x 1m pieces of waterproof polyester matting are available if required. The polyester tape and matting are designed to reinforce the membrane in areas where additional stresses may be encountered such as junctions between walls and floors, changes in plane, internal and external corners, around floor drains and channels and on suspended and timber floors and in heavily trafficked areas.

Norcros Wet Seal is suitable for use on all types of substrate for interior tile installations including moisture sensitive backgrounds such as timber, plaster and plasterboard. It is also ideal for use on tile backer boards. N.B. proprietary tile backer boards are designed to remain dimensionally stable during partial/ complete saturation, however they are not impervious to the passage of water until they have been coated with Norcros Wet Seal.

Norcros Wet Seal should not be used externally or in areas of total immersion such as swimming pools.

Norcros Wet Seal may be tiled 24 hours after application, however in low temperatures or in areas of high humidity this drying time will be extended.

£38.95 + VAT

Data Sheet

Safety

To order call 07711 017464

Durabase CI++
Durabase CI++
DURABASE CI++ Crack-bridging decoupling mat with shearing force protection
 
• Tiles can be laid once the subsurface can be walked on
• Decoupling of problematic subsurfaces
• Protecting against cracks
 
The DURABASE CI++ multifunctional matting system, with its 3-layer construction, offers much more than decoupling. With its crack-bridging properties and optimised shearing force protection, it allows new tiles to be laid on old and damaged tiled floors, provided that these are still load-bearing. For fresh screed, tiles can be laid immediately as soon as the screed can be walked on.  Quick and straightforward to install and offering maximum installation reliability, DURABASE CI++ is ideal for renovation projects and for laying on mineral subsurfaces which are not quite dry.


£5.95 + VAT per metre
SI Grey Slowset £12.50 + VAT
SI Grey Rapidset £12.50 + VAT
SI White Slowset £14.50 + VAT
SI White Rapidset £14.50 + VAT
Pro 50 Levelling £13.50 + VAT

Data Sheet

To order call 07711 017464

Profile Plus
Profile Plus

Profile Plus

Our unique Impact Absorption Zone is the design feature that makes the Profile Plus Tile edging anything but “standard!” This important zone allows the edge strip to absorb impacts without the grout cracking or tiles chipping.

  • Round edge PVC tile trim: Length: 2.44m
  • Protects and decorates tiled outer wall corners & other tiled edges
  • Unique upstand profile eliminates cracked grout joints
  • Corner pieces available. Use to create a 3-way join
  • New Corner Pieces Now Available

 

 

For more information or to order call 07711 017464

Profile Plus
Ultrashine Quadrant Tile Edge

Ultrashine Quadrant Tile Edge

  • Ultra Shine round edge PVC tile trim
  • Protects and decorates tiled outer wall corners and other tiled edges
  • Unique upstand profile eliminates cracked grout joints
  • Corner pieces available use to create a 2 or 3 way join
  • Length: 2.44m

6mm – £7.95 + VAT per length
8mm – £7.95 + VAT per length
10mm – £7.95 + VAT per length
12mm – £7.95 + VAT per length

For more information or to order call 07711 017464

L-SHAPE METAL TILE EDGING
L-SHAPE METAL TILE EDGING

L-Shape Metal Tile Edging

  • L-shape tile trim in annodised aluminium
  • Protects and decorates tiled outer wall corners & other tiled edges
  • Easy to fit – no need to mitre!
  • Can be used as a feature strip within walls & floors
  • Will co-ordinate with todays modern fixtures & fittings
  • Length: 2.44m

6mm – £7.95 + VAT
8mm – £7.95 + VAT
10mm – £7.95 + VAT
12mm – £7.95 + VAT
15mm – £7.95 + VAT

For more information or to order call 07711 017464

 

Norcros One Part Direct To Wood
Norcros One Part Direct To Wood

Norcros One Part Tile Direct to Wood Adhesive is a 1-part highly flexible rubberised thin bed wall and floor tile adhesive specifically designed for fixing fully vitrified porcelain, ceramic and dark natural stone tiles to substrates where background movement, vibration or thermal movement precludes the use of conventional polymer modified cement-based adhesives.

It is water-resistant and is suitable for use in both internal and external locations. It has a setting time of 3 hours at 20oC, permitting early trafficking of the tiled installation. The adhesive has excellent thermal ageing properties.

Designated BS EN 12007 C1FS1

£23.95 + VAT

Data Sheet

Safety

For more information or to order call 07711 017464

ultim8+
Ultim8+

Norcros Ultim8+ Adhesive is a ready mixed dispersion thin bed wall tile adhesive designed for fixing ceramic wall tiles to a variety of substrates. It has excellent non-slip characteristics reducing the need for support battens. It is highly water resistant and is suitable for internal wall tiling in dry, intermittent and frequently wet areas such as domestic and commercial showers including power showers. It has a long pot life for ease of use and minimal wastage. In normal conditions tiles can be grouted 24 hours after fixing.

Conforms to classification BS EN 12004 D2T

£12.00 + VAT

Data Sheet

Safety

For more information or to order call 07711 017464

ultim8-m
Ultim8-m
Norcros Ultim8 M+ is a water-based ready mixed synthetic latex polymer contact adhesive designed to fix Norcros Acoustic Matting and fleece backed polyethylene type decoupling membranes to a variety of surfaces, including plywood and raised access flooring, with minimal surface preparation. The open time of the adhesive is approximately 20 to 40 minutes, with a setting time of approximately 24 hours at 20oC.
 

£9.85 + VAT

Data Sheet

Safety

For more information or to order call 07711 017464